HPAVC/HPAVC CD-ROM.iso/DMNOLAC.ZIP/0611.PCB

Text File | 1996-07-17 | 6KB | 135 lines

@X086@X05.@X0811 @X03    BASIC ROCKET BOMB

     @X08A rocket bomb is simply what the name implies@X05:@X08 a bomb that is delivered
to its target by means of a rocket@X05.@X08  Most people who would make such a device
would use a model rocket engine to power the device@X05.@X08  By cutting fins from balsa
wood and gluing them to a large rocket engine@X05,@X08 such as the Estes @X05"@X08C@X05"@X08 engine@X05,@X08 a
basic rocket could be constructed@X05.@X08  Then@X05,@X08 by attaching a @X05"@X08crater maker@X05",@X08 or CO2
cartridge bomb to the rocket@X05, @X08a bomb would be added@X05.@X08  To insure that the fuse of
the @X05"@X08crater maker@X05"@X05 (@X08see sect@X05.@X08 4@X05.@X0842@X05)@X08 ignited@X05,@X08 the clay over the ejection charge
of the engine should be scraped off with a plastic tool@X05.@X08  The fuse of the bomb
should be touching the ejection charge@X05,@X08 as shown below@X05.


          ____________ @X08rocket engine
          |                         _________ @X08crater maker
          |                         |
          |                         |
          V                         |
     @X03_________________________________          V
     @X03|_______________________________|   ______________________
     @X03 \   | @X05- - - - - -@X03|@X05***@X03|@X05::::@X03|       /@X05# # # # # # # # # # # @X03\
     @X03  \__| @X05- - - - - -@X03|@X05***@X03|@X05::::@X03|  ___/  @X05# # # # # # # # # # #  @X03\
     @X03   __  @X05- - - - - -@X03|@X05***@X03|@X05::::@X03|@X05---@X08fuse@X05--- # #  @X08explosive@X05  # # @X03)
     @X03  /  | @X05- - - - - -@X03|@X05***@X03|@X05::::@X03|  ___   @X05# # # # # # # # # # # @X03/
     @X03 /___|____________|___|____|____ \_______________________/
     @X03|_______________________________|

     @X08thrust@X03>@X05 - - - - - -
     @X08smoke@X03>@X05  ***
     @X08ejection charge@X03>@X05 ::::


     @X08Duct tape is the best way to attach the crater maker to the rocket
engine@X05.@X08  Note in the diagram the absence of the clay over the ejection charge
Many different types of explosive payloads can be attached to the rocket@X05,@X08 such as
a high explosive@X05,@X08 an incendiary device@X05,@X08 or a chemical fire bottle@X05.

     @X08Either four or three fins must be glued to the rocket engine to insure
that the rocket flies straight@X05.@X08  The fins should look like this@X05:


        @X03  |\
         @X03 | \
          @X03|  \
          @X03|   \  @X05<--------- @X08glue this to rocket engine
          @X03|    \
          @X03|     \
          @X03|      \
          |       |
          |       |
          |       |
  @X08leading edge    @X03|     |
  @X05 ------->       @X03|     |
          |       |
          |       |  @X08trailing edge
          @X03|       |   @X05 <--------
          @X03|       |
          |       |
          |       |
          |       |
           \_____/


     @X08The leading edge and trailing edge should be sanded with sandpaper so
that they are rounded@X05.@X08  This will help make the rocket fly straight@X05.@X08  A two
inch long section of a plastic straw can be attached to the rocket to launch it
from@X05.@X08  A clothes hanger can be cut and made into a launch rod@X05.@X08  The segment of
a plastic straw should be glued to the rocket engine adjacent to one of the fins
of the rocket@X05.@X08  A front view of a completed rocket bomb is shown below@X05.

                @X03     |
                     |
                     |
           @X08fin    @X03   | @X05<------ @X08fin
            @X03@X05|      @X03  |           @X05|
            @X05|       @X03 |           @X05|
            @X05|     @X03 __|__         @X05|
            @X05V    @X03 /     \        @X05V
           @X03---------------|      @X05@X03|---------------
                  \_____/
                     |o @X05<----------- @X08segment of plastic straw
                     @X03|
                     |
                     | @X05@X05<------@X08 fin
                     @X03|
                     |
                     |

     @X08By cutting a coat hanger at the indicated arrows@X05,@X08 and bending it@X05,@X08 a
launch rod can be made@X05.@X08  After a fuse is inserted in the engine@X05,@X08 the rocket is
simply slid down the launch rod@X05,@X08 which is put through the segment of plastic
straw@X05.@X08  The rocket should slide easily along the coathanger@X05.@X08

                  @X03 ____
                @X03  /    \
                 |      |
         @X08cut here @X05_____@X03 |
                 |      |
                 |      |
                 |     / \
                 V    /   \
    _________________/     \________________
   /                                        \
  /                                          \
 /____________________________________________\
                      @X05       ^
                             |
                             |
              @X08and here@X05 ______|


     @X08Bend wire to this shape@X05:

                         _______@X08 insert into straw
                         @X05|
                         |
                         |
                         V
         @X03 ____________________________________________
          \
           \
            \
             \
              \ @X05 <--------- @X08bend here to adjust flight angle
              @X03 |
               |
               |
               |
               |
               |@X05 <---------- @X08put this end in ground
              @X03 |


@X05.@X08PA